TYPICAL PIPING DIAGRAM SHOWING THE INSTALLATION OF MOLETRON

L e g e n d:

1.   Generator for cold fuel oil Unit
2.   Generator for warm fuel oil Unit
3.   Coaxial cable (armoured)
4.   Transducer-inducer devices
5.   Treatment cell for cold fuel oil
6.   Treatment cell for warm fuel oil
7.   Fuel oil service tank
8.   Mixer device
9.   Fuel oil booster pump
9.1.Same as 9, to show that the cell may be installed either before or after the fuel oil pumps
10. Fuel oil preheater
11. Fuel oil atomisers (when TSS) or plunger pumps (when M/V)
12. Fuel oil return valve KEEP IT CLOSE !
13. Return line back to fuel oil mixer
14. or directly back to fuel oil pump
15. IMPORTANCE NOTICE. Any return line discharging on the ullage of the service tank, must be securely closed, in order to prevent hydrocarbon gas release and waste of energy.